This is the original walkthrough, kept for reference. Software and services have changed since it was written. Read the current guide.
This illustrated walkthrough includes older software and hardware. Its screenshots explain the workflow, but menu names, prices, requirements and service availability may differ. Use the linked project documentation for the version you are running. For the current app, step by step, read Sparrow: build a wallet you can inspect.
⚠️ This guide was written long before COLDCARD's catastrophic seed generation bug was exploited in 2026, and it uses a COLDCARD in its examples. I no longer recommend COLDCARD. A firmware bug that went unnoticed from 2021 until July 2026 made seeds generated on affected COLDCARD firmware far weaker than intended, and attackers regenerated private keys and stole funds (Coinkite's advisory, more detail). Affected seeds are those generated on the device with Mk2 or Mk3 firmware 4.0.1 to 4.1.9, Mk4 or Mk5 firmware before 5.6.0 (Edge before 6.6.0X), or Q firmware before 1.5.0Q (Edge before 6.6.0QX), unless at least 50 private dice rolls were used. Updating the firmware does not repair an affected seed. If your seed is affected, move your funds to a new wallet now.
I recommend Passport Prime instead. The general Sparrow workflow is the same, but the hardware wallet steps will differ.
Disclosure: I work at Foundation, the company that makes Passport Prime.
What is Sparrow Wallet?
Sparrow is a desktop only bitcoin wallet, available on all major platforms that provides a fantastic alternative to Electrum or Specter. Sparrow provides huge amounts of detail to the user relating to their ’s, transactions and balances, but does so in a very user friendly manner.
Features
Sparrow Wallet comes with everything you’d expect from a desktop based wallet, and much more…
- Own node backing (via Electrum server or Bitcoin Core)
- Ability to connect to pre selected public Electrum servers for those without their own node
- Ability to broadcast through Tor network using an external node
- Wallet imports (including Electrum)
- All major hardware wallet support (including air gapped devices)
- Coin selection and labelling
- Multi-Sig
- PSBT
- Watch only wallets
- Custom derivation paths
Download and verify Sparrow Wallet
Obtain a matching installer, manifest and signature from the official download page. Modern Sparrow can verify releases through Tools → Verify Download. For a first installation, follow the published GPG procedure and establish trust in the signing key separately.
- Download Sparrow Wallet for your chosen operating system
- Download the
Manifest.txt+Manifest.ascfiles
FIG. 01Download and verify Sparrow Wallet
- Import Craig Raw’s public key
curl https://keybase.io/craigraw/pgp_keys.asc | gpg --import
FIG. 02Download and verify Sparrow Wallet
Verify the signed manifest for the version you actually downloaded: run gpg --verify MANIFEST_SIGNATURE_FILE MANIFEST_FILE in their folder. The signature and plaintext manifest must come from the same release. Authenticate the full signing-key fingerprint, not only the displayed author name.
-
Look for ‘Good signature from “Craig Raw craigraw@gmail.com”. This confirms the file came from the entity in control of Craig Raw’s private GPG key
FIG. 03Download and verify Sparrow Wallet
Hash the installer you downloaded using sha256sum INSTALLER_FILE on Linux or shasum -a 256 INSTALLER_FILE on macOS, and compare it with the same filename's entry in the authenticated manifest. Do not compare a different architecture or package format.
FIG. 04Download and verify Sparrow Wallet
- Open the
Manifest.txtfile you downloaded earlier and check that the hash provided matches the one shown in your terminal window. A match confirms the contents of the file you downloaded are an exact match to the one built by Craig when he signed these files
FIG. 05Download and verify Sparrow Wallet
If you’re using Windows, there’s a guide for installation and verification of Sparrow here.
Initial Set up
FIG. 06Initial Set up
Sparrow Wallet offers users 3 ways to get started, each with their own pro’s and con’s.
| Server Type | Trade-off | Positives |
|---|---|---|
| Pre selected public Electrum Server | Not your own hardware and shares wallet information with the entity running the server | Easiest way to get started |
| Private Bitcoin Core node | Wallet imports can take a while and uses Bitcoin Core which stores it’s wallets unencrypted | Next easiest setup type (user can just download Bitcoin Core) |
| Private Electrum Server | Biggest barrier to entry | A wallet server can learn about the addresses it serves. Using your own compatible server reduces that disclosure, but it does not hide on-chain transactions or remove the need to maintain and secure the server. |
A wallet server can learn about the addresses it serves. Using your own compatible server reduces that disclosure, but it does not hide on-chain transactions or remove the need to maintain and secure the server.
After reading through the initial welcome screens, click ‘Configure Server’. Sparrow will default to a public Electrum Server but for the purpose of the rest of this guide, we will be connecting to a private Electrum Server. Select that option from the menu at the top.
- Enter your Electrum Server onion address (or local IP address)
- Set the port to
50001 - Toggle
Use SSLoff - Specify optional Tor proxy and port (if you don’t know what this means, leave these boxes blank)
FIG. 07Initial Set up
- Click ‘Test Connection’. After a brief wait you will see a successful connection notification.
FIG. 08Initial Set up
If the connection fails, first check the server address, configured port and transport against your Electrum server settings. Port 50001 commonly uses plain TCP and 50002 commonly uses TLS, but these are conventions. Enable SSL only for the endpoint configured to provide TLS. An onion endpoint uses Tor's authenticated encrypted transport; do not expose an unauthenticated plaintext service over the public internet.
For those with an Umbrel node, you can follow this guide by Athena Alpha that outlines how to connect Sparrow to your own Umbrel node using the Electrs app. They also have a guide showing how to connect Sparrow to Bitcoin Core as well.
Importing your Coldcard
Review the current COLDCARD model and firmware-track matrix before following these historical screens. Fixed firmware and an unaffected seed are different requirements. Use the official migration instructions if a seed was generated through an affected flow.
The following assumes that you have already initiated your Coldcard. If you have yet to do so, you can follow this guide.
- On your Coldcard go to
Advanced>Micro SD>Export Wallet>Generic JSON.
This will make a copy of your wallet onto your SD card that is readable by Sparrow Wallet. You can find more detail on this here. Once complete put the SD card into your computer.
- In Sparrow, go to
File>Import Wallet>Import File.
FIG. 09Importing your Coldcard
- Choose the
coldcard-export.jsonon the SD card. - Select the script type and press
Import.
P2PKH = ‘Legacy’ addresses starting with a
1P2SH-P2WPKH = ‘Segwit’ compatibility addresses starting with a3P2WPKH = ‘Native Segwit’ addresses starting withBC1
FIG. 10Importing your Coldcard
- Choose a name for your wallet.
FIG. 11Importing your Coldcard
- Give your wallet an optional password. This password is specific to Sparrow and has nothing to do with the underlying seed.
FIG. 12Importing your Coldcard
- That’s it! You should now see your home screen with your Cold Card transactions and balances. (This is a brand new empty wallet shown below).
FIG. 13Importing your Coldcard
Receive a transaction
- Go to the receive tab to view your first receive address. You can then share the address or QR code with whoever is sending you bitcoin.
FIG. 14Receive a transaction
- You should always verify the receive address on your Coldcard.
FIG. 15Receive a transaction
Sending a transaction
Using these steps the wallet will choose which UTXO’s it spends for you.
- Go to the send tab
- Paste the address you are sending to
- Enter the amount and adjust your fee rate
- Press
Create transaction
FIG. 16Sending a transaction
- The next screen provides an incredibly detailed breakdown for the more advanced user to fine tune so more technical details where required. For most users the default settings will be fine, click
Finalize transaction for signing
FIG. 17Sending a transaction
- Click
Save PSBTand select the SD card as the save location
FIG. 18Sending a transaction
- Pass the SD card back to your Coldcard and click
Ready to Sign - Choose the file name of the
.psbtfile you just saved from Sparrow - Review the transaction details and press
sign - The Coldcard will now save a
signed.psbtfile to the SD card
To broadcast the transaction…
- Load the SD card back into your computer
- In Sparrow press
Load PSBT - Choose the signed PSBT file on the SD card
- You can now have a final review of the details and broadcast the transaction to the network
Spending using specific UTXO(s)
- Go to the
UTXOtab - Select all of the UTXO’s you want to use to create your transaction
- Press
send selected - Follow the steps outlined in the previous section
Creating a multisig wallet
As well as being fantastic at single sig support, it also excels at ! This section assumes that you have already initiated these devices, if you have not already done so, follow these steps.
Here is a brief run down of setting up a 2-of-3 quorum using Sparrow.
- Click
File>New Wallet, give the wallet a name then clickCreate new wallet - Change the
Policy TypetoMulti Signature - Choose your cosigner setup (we are using 2-of-3 here)
FIG. 19Creating a multisig wallet
Coldcard Import
- Ensure the SD card is inserted into the Coldcard then go to
Settings>Multisig Wallets>Export XPUB - The Coldcard will save a file that looks like
ccxp-8ff26349.jsonto the SD card - Pass the SD card back to your computer
FIG. 20Coldcard Import
- In Sparrow ensure Keystore 1 is selected and press Air Gapped Hardware Wallet
- Choose
Import Filenext toColdcard Multisig
FIG. 21Coldcard Import
Cobo Vault Import
- Open the menu with the button in the top left of the screen then press
Multisig Wallet.
FIG. 22Cobo Vault Import
- Tap the three dots in the top right corner then
Show/Export XPUB. This will bring up a QR on screen.
FIG. 23Cobo Vault Import
- In Sparrow, select
Keystore 2>Air Gapped Hardware WalletthenScanfor the Cobo Vault Multisig option. This will open your computer’s camera, hold the device so that the QR code on the Cobo can be read
FIG. 24Cobo Vault Import
Specter DIY Import
- In Specter DIY tap
Master Public Keys>Multisig. The screen should then show a QR code
FIG. 25Specter DIY Import
- In Sparrow, select
Keystore 3>Air Gapped Hardware WalletthenScanfor the Specter DIY Multisig option. This will open your computer’s camera, hold the device so that the QR code on the Specter DIY can be read
FIG. 26Specter DIY Import
- Click
Applythen set an optional password to secure your wallet
Notifying signers
Now that the wallet is created, we need to notify each signer of the wallet creation.
Notify Coldcard
- Press
Export>Export Filenext to Coldcard Multisig - Insert the Coldcard micro SD card into your computer and copy the generated
.txtfile onto it - Remove the SD card and insert back into your Coldcard
FIG. 27Notify Coldcard
- Power on your Coldcard and enter your PIN. Go to
Settings>Multisig Wallets>Import from SD.
FIG. 28Notify Coldcard
- There will only be one to choose from
FIG. 29Notify Coldcard
Check that the policy, cosigner fingerprints and public-key information on the signing device match the intended multisig wallet in Sparrow, then confirm.
FIG. 30Notify Coldcard
Notify Cobo
- Press
Export>Shownext to Cobo Vault Multisig - On the Cobo open the menu then press
Multisig Wallet>Import Multisig, then tap the QR scanner button in the top right
FIG. 31Notify Cobo
- Scan the QR code being displayed by Sparrow then check the public key information shown on the device matches those displayed in Sparrow
FIG. 32Notify Cobo
Notify Specter DIY
Verify the receiving address using the signer’s supported address-verification flow and the correct wallet policy. Compatibility varies by device and software version; do not treat an unverified address as safe because it appears in the coordinator.
Backup
Multisig backups are more complex than their single signature counterparts. You can read an in-depth look at this here.
- In Sparrow click
Export>Export Filenext to Sparrow - If your wallet is not password protected, this will create a
.jsonfile that you can back up onto as many SD cards as you like - If the wallet is password protected this will download a copy of your encrypted wallet file which you can open in Sparrow
This file is a ‘view only’ into your multisig wallet. To spend you still need m-of-n signers or seed backups
FIG. 33Backup
Verify Receive Addresses
You will have already noticed that Sparrow shows you your first receive address. It is now important to verify that receive address on our trusted signing devices. Not all signing devices facilitate this, which is the reason both Coldcard and Cobo were included into this guide.
Sparrow
- Click into the receive tab and your first receive address will be shown
FIG. 34Sparrow
Coldcard
- Power on your Coldcard and enter your PIN. Press
Address Explorer. scroll to the bottom and enter the number indicated to start - Scroll to the bottom of the next page and choose your recently imported multisig wallet
- You will now have the option to save these to the SD card which could be useful if you plan on receiving often and won’t have easy access to your devices
- Scroll down, you will see the fingerprint of each signer, after that you should see a partially hidden version of your first receive address. Check it matches the one shown by Sparrow
FIG. 35Coldcard
Cobo Vault
- Open the menu and press
Multisig Walletwhich will open the receive tab. Press the top address and check it matches the one shown in Sparrow
FIG. 36Cobo Vault
All 3 match? Send a very small amount of sats to your verified address
Spending
- Create the transaction in the same way described earlier then press
Create Transaction
FIG. 37Spending
- Review the transaction details then click
Finalize Transaction for Signing
FIG. 38Spending
Sign with Coldcard
- Click
Save PSBTand select the SD card as the save location - Pass the SD card back to your Coldcard and click
Ready to Sign - Choose the file name of the
.psbtfile you just saved from Sparrow - Review the transaction details and press
sign - The Coldcard will now save a
signed.psbtfile to the SD card - Pass the SD card back to your computer
- In Sparrow, click
Load PSBT, choose thepart.psbtfile
We now have 1 of a required 2 signatures
FIG. 39Sign with Coldcard
Sign with Cobo Vault
- In Sparrow, click
Show QR - On Cobo Vault, open your multisig wallet and press the QR scanner button
Scan the transaction QR code displayed by Sparrow with the signing device, then review the recipient, amount, fee and change before signing.
- Review the transaction details, confirm and enter your password. The device will then show an animated QR code on screen
- Inn Sparrow, click
Scan QR, this will open your computer’s camera. Hold the Cobo device up to the camera for Sparrow to read the signed transaction
We now have 2 of a required 2 signatures
FIG. 40Sign with Cobo Vault
- Click broadcast transaction to sned the signed multisig transaction to the network
FIG. 41Sign with Cobo Vault
Where can I learn more?
If you want to try Sparrow Wallet for yourself visit their website and for the more technical user that wants to look under the hood, visit their GitHub. You can also follow them on Twitter to stay up to date with the latest developments.
If you need help getting started with Sparrow, I offer private support calls for those that benefit from more personalised tuition.
Disclaimer - All views expressed in this article are my own and not those of the Sparrow team.

