What Cake Wallet is
Cake Wallet is a self-custodial wallet for phones and computers, made by Cake Labs. You hold the keys. It holds many coins, and its Bitcoin side covers a lot: silent payments, Payjoin, coin control, a choice of address types, your own node, built-in Tor, hardware wallet support and Lightning with an address of your own.
This guide covers Bitcoin only. It also holds Monero, Litecoin, Zcash and a long list of other coins. Those are not covered here, and you can ignore them.
Version 6.5.3 was current when I checked: released on 5 November 2026. It needs Android 8, iOS 15 or macOS 13. The Linux build lags behind at 6.4.4, and Cake's own docs say Windows builds are paused, so use a phone if you can. Button names below come from the app's source code at version 6.5.3.
Get it from the App Store, Google Play, Accrescent, Cake's own F-Droid repository or GitHub. On GitHub, releases since 6.5.2 come with a signed list of checksums so you can verify the download.
Cake Wallet docs: Bitcoin ↗ · Cake Wallet 6.5.3 release ↗ · Verifying downloads ↗
What you are trusting
- Your money. The keys are made and kept on your device. Cake cannot spend, freeze or recover your coins. The code is open source under the MIT licence.
- Your privacy. Out of the box the app talks to servers run by Cake: one to look up your balance and send transactions, and one for fee estimates. Cake's privacy policy says those servers see your internet address and your transactions but do not store them. Your own node keeps your transactions away from Cake, and Tor hides your internet address (see Privacy settings).
- Lightning. The Lightning balance works differently from the rest of the wallet and has its own trade-offs. It has its own section below.
- Swaps, buying and selling. These are run by third-party companies, not by Cake. Any identity checks come from them.
No account, email or identity check is needed to use the wallet itself.
Set up and back up
The first launch asks you to set a PIN, four digits by default, or six with Switch to 6-digit PIN. Choose six. Then create the wallet.
Welcome
By continuing, you agree to our Terms of Service
Advanced Settings, on the New Wallet screen, is worth a look first. Recovery phrase type is BIP39 by default: keep it, because it is the standard other wallets can read. Recovery phrase length offers 12 or 24 words, and (Optional) adds an extra word you must also keep safe. The same screen lets you add your own node before the wallet first connects.
Next comes the recovery phrase.
Skip this step
Write the words on paper, in order. No screenshot, no notes app, no cloud. Anyone who has them has your money, and they are the only way back if the device is lost.
Two buttons on the phrase screen undo that care, so leave them alone. Save hands the words to your phone's share menu as plain text (on a computer it writes them to a text file), and the copy button puts them on the clipboard where other apps can read them.
The check only asks for two words, so it proves little. Read your paper back against the screen yourself. You can see the words again later under Settings > Wallet settings > Recovery & Keys.
Receive
bc1q... (example)
Standard ▾- Tap Receive.
- For most payments keep Standard, a bc1q address. The info box says it all: Your receive address will rotate every time you receive a transaction. Old addresses keep working, but a fresh one each time is better for your privacy.
- Show the QR code, or tap Copy. Set amount adds an amount to the code, and Label notes who paid you, for your own records.
Tap the address type under the QR code to switch. The menu offers Lightning, Silent Payments and Standard. More Options holds Taproot and three older address types you only need if a sender cannot pay a bc1q address.
Silent payments
A silent payment address is one address you can publish, on a website or a tip jar, without every payment to it being linked together on the blockchain. Each payment lands on a fresh address that only your wallet can recognise. The silent payments guide explains how.
- On the Receive screen, switch the address type to Silent Payments and share the sp1 address.
- Your wallet has to scan the blockchain to find payments. Turn that on under Settings > Bitcoin Settings > Silent Payments with Set Silent Payments always scanning.
- To look further back, Silent Payments Scanning on the same page can scan from a block height or a date.
Two things to know. Scanning needs a server that can serve the data it uses. If yours cannot, the app says Your current node does not support Silent Payments. Cake Wallet will switch to a compatible node while scanning, and uses Cake's own, even when you have set your own node. And silent payments work only on the first Bitcoin account of a wallet that holds its own keys, not on a hardware or watch-only wallet.
Sending to someone else's silent payment address needs nothing special: paste the sp1 address on the Send screen like any other.
Send
- Tap Send. Paste the address with Paste, scan it with QR code, or pick a saved one from Address Book.
- Enter the amount. Max sends everything, less the fee.
- Open Advanced Settings to choose Fees. Medium is the default and Cake puts it at about an hour. Fast is about 30 minutes, Slow a day or more, and Custom lets you type your own rate.
- Tap Continue, check Send to, the amount and the Fee line, then swipe Swipe to send.
Coin Control (optional), in the same Advanced Settings, lets you choose which coins pay. Use it to avoid mixing coins you would rather keep apart, such as ones bought with your identity attached and ones that were not. To keep a coin out of every payment, freeze it under Settings > Bitcoin Settings > Coin Control.
Stuck payment? Open it in your history and tap Bump fee to send it again with a higher fee. The button only appears while the payment is unconfirmed, and not for a payment to a silent payment address or one that spent coins which were themselves still unconfirmed.
Payjoin
Payjoin is a payment where the receiver adds one of their own coins. To anyone reading the blockchain, the usual guess that every input belongs to the sender is then wrong, which makes the payment harder to trace and the amount harder to read.
- Turn it on under Settings > Privacy > Use Payjoin. It is off by default and only on the phone apps.
- To receive this way, you need some bitcoin in the wallet already. Your QR code then shows Payjoin enabled.
- With it on, when you pay someone whose wallet offers Payjoin, Cake uses it.
Cake's docs say Payjoin needs no server. That means you do not run one. The app's code still passes messages through a public Payjoin directory and three relays, one run by Cake and two by others.
Lightning
Every Bitcoin wallet made from recovery words gets a Lightning balance and a Lightning address, name@cake.cash, on the phone apps and on Mac. There are no channels to open or manage, and payments can arrive while the app is closed. That simplicity comes with one big difference from Phoenix or ZEUS.
Cake's Lightning runs on Spark, through the Breez software. Your Lightning balance does not sit in a channel or on the Bitcoin blockchain. It sits on the Spark network, where a small, permissioned group of companies co-signs every transfer and can see the amounts. Cake's own docs say to treat it as a spending balance and that its privacy is not cryptographic privacy. The keys still come from your recovery words.
- Receive. Switch the Receive screen to Lightning and share your name@cake.cash address, or use Set amount for a one-off invoice. There is no minimum.
- Send. Paste or scan a Lightning invoice, a Lightning address or an LNURL code on the normal Send screen. It pays only from the Lightning balance and does not dip into your on-chain coins.
- Move money between the two. The Lightning balance has Deposit and Withdraw. Both are blockchain transactions with normal fees and wait for six confirmations, so allow about an hour.
- Your username. Change it under Settings > Bitcoin Settings > Lightning Username. It is tied to your recovery words, it is public, and the app has no way to release it. Choose one you are happy to give out.
- Fees. Cake does not publish a Lightning fee schedule. The app shows the fee before you send.
Lightning is on by default. If you do not want it, turn it off under Settings > Privacy > Enable Lightning. For a closer comparison with other Lightning wallets, see the Lightning wallet map.
Privacy settings
- Your own node. Under Settings > Bitcoin Settings > Nodes, tap Add new node and enter your Electrum server's Node Address and Node port. Fulcrum and electrs both work. Then your balance and history no longer go through Cake. Silent payment scanning may still use Cake's server, as described above.
- Tor. Settings > App settings > Connections > Enable built-in Tor routes the app over Tor without a separate app. Cake labels it experimental, and syncing is much slower. Orbot is the other option.
- Fee estimates. By default they come from Cake's own mempool server. With built-in Tor on, Cake's docs say the request goes over Tor too.
With a hardware wallet
Cake Wallet can be the app for a hardware wallet that keeps the keys. Choose Restore Wallet, then Hardware wallet.
- Ledger, Trezor and BitBox connect over Bluetooth, or over USB on Android. Which models work over which connection varies, so check Cake's hardware wallet page for yours.
- Cupcake, Cake's own app for an offline phone, and some other QR-based signers sign by QR code: Cake shows the unsigned transaction as an animated QR code, and you scan the signed one back.
- SeedSigner, Keystone and Passport appear in the app's device list as Coming Soon. Cake's docs say they are not supported yet.
With a hardware wallet, silent payments, Payjoin and Lightning are switched off. I found no way to import or export a transaction as a file: signing is by QR code or cable only.
Lock it down
Settings > Security holds the locks:
- Change the PIN, and allow fingerprint or face unlock.
- Setup Cake 2FA adds a second check before sensitive actions, such as exporting a backup.
- A Duress PIN: entering it instead of your real PIN wipes every wallet from the device. Only use this if your paper backup is safe and tested, because the wallets are gone afterwards.
- An option to block screenshots inside the app.
Keep the app updated. Cake has published two security advisories this year, both fixed: in 6.4.4 and in 6.5.2.
Backup and recovery
The words are a standard BIP 39 recovery phrase, and a Bitcoin wallet made with them uses the usual native segwit path. To restore, install Cake Wallet, choose Restore Wallet, then Recovery Phrase or Keys, and tick This wallet has a passphrase if you added one. You can also restore words made in other wallets.
- The backup file. Settings > App settings > Backup exports an encrypted file holding all your wallets and settings, protected by a long password the app makes for you. Write that password down too. The file can only be restored on a fresh install, and Cake says it complements your recovery words: it does not replace them.
- The Lightning balance and your username come back with the same words and passphrase.
- Test it. Before the balance matters, restore once on a second device with a small amount, so you have seen it work. A recovery rehearsal shows how to practise safely.
Other coins, swaps and Cake Pay
The same app holds Monero, Litecoin, Zcash, Ethereum and its relatives, Solana and others. In-app swaps and the buy and sell buttons are run by third-party companies, each with its own fees and its own rules on identity checks. Cake Pay sells gift cards for bitcoin with an email sign-in. None of these are part of holding your own bitcoin, and you never need to touch them.
Before you rely on it
- The words are on paper, checked against the screen, and you never used Save or copy.
- A six-digit PIN is set.
- You know your Lightning balance is a spending balance held on Spark, and keep savings on-chain or on a hardware wallet.
- If privacy matters to you, you use your own node or Tor, and Payjoin is on.
- You have restored the wallet once on another device.
- The app is up to date.
Cake Wallet is a good fit if you want silent payments, Payjoin and an easy Lightning address in one place. If you would like a walk-through, or help deciding how it fits beside the rest of your Bitcoin, that is something I cover in mentorship sessions.
Sources & further reading
Researched 16 November 2026. Software and services change: check the current documents before you act.
- Cake Wallet ↗
- Cake Wallet docs: create a new wallet ↗
- Cake Wallet docs: Bitcoin ↗
- Cake Wallet docs: Bitcoin Lightning ↗
- Cake Wallet docs: silent payments ↗
- Cake Wallet docs: Payjoin ↗
- Cake Wallet docs: built-in Tor ↗
- Cake Wallet docs: manage nodes ↗
- Cake Wallet docs: coin control ↗
- Cake Wallet docs: create a backup ↗
- Cake Wallet docs: restore from a hardware wallet ↗
- Cake Wallet 6.5.3 release ↗
- Cake Wallet 6.5.3: the app's own wording ↗
- Cake Wallet: source code ↗
- Cake Wallet: privacy policy ↗
- Cake Wallet: verifying downloads ↗
- Cake Wallet on the App Store ↗
- Cake Wallet on Google Play ↗
Silent Payments → · Choose the Lightning setup you can maintain → · Phoenix → · Your balance is a collection of stories → · Your first self-custody weekend → · A backup is a plan you have tested →
