What Start9 and StartOS are
Start9 makes StartOS, an operating system for running a personal server at home, and sells small computers with it installed. You manage it from a web browser on your home network, and install software from a built-in Marketplace: a Bitcoin node, an Electrum server, a Lightning node and much else.
The current major version is StartOS 0.4, a ground-up rewrite that replaced 0.3.5.1. Version 0.4.0 came out on 24 July 2026. On 17 November 2026 the latest release was 0.4.2.1, published on 12 November, with a 0.4.3 release candidate out for testing. Backups made on 0.3.5.1 cannot be restored on 0.4, and older walkthroughs no longer match the screens.
StartOS runs on:
- Start9's own server. The one on sale now is the Server One, with 16 or 32 GB of memory and a 2 or 4 TB SSD. Start9's hardware page lists every older model and the StartOS image each one takes.
- Your own hardware. Start9 publishes installers for x86_64 (Intel and AMD), ARM64 and RISC-V computers, and an image for the Raspberry Pi 4 only. Start9 points to a community list of known-good hardware, and its own notes say a Raspberry Pi 4 is not recommended for the Bitcoin stack.
The StartOS repository (github.com/Start9Labs/start-os, which now redirects to Start9's start-technologies repository) is under the MIT License, apart from a few third-party files named in its NOTICE file. It replaced the Start9 Non-Commercial License in October 2023. In plain terms: anyone may read, change, build and redistribute the code, including commercially, as long as the copyright notice goes with it.
StartOS 0.4.2.1 release ↗ · StartOS licence ↗ · Start9: hardware ↗
Before you start
- Hardware. A Start9 server, or a supported computer plus a USB stick for the installer. Start9 says a surge protector is required and a UPS (a battery backup) is strongly recommended.
- Storage. The full blockchain is well over 700 GB and grows every week: Bitcoin Core 32.1 budgets 897 GB for block data plus 14 GB for its record of unspent coins, and Start9's Fulcrum instructions plan for about 800 GB. An Electrum server adds its own index, 180 GB or more for Fulcrum, and Start9 strongly recommends a 2 TB drive for the pair. On a disk under roughly 900 GB, StartOS prunes the node automatically and you cannot turn that off. A pruned node cannot run an Electrum server.
- Time. Bitcoin's first sync takes from several hours to a few days, depending on the hardware, the disk and your connection. The Electrum server's index then takes many more hours.
- Home network. A wired Ethernet connection to your router, and a computer on the same network for setup. Start9 recommends giving the server a fixed (static) IP address in your router's settings.
Start9: archival vs pruned nodes ↗ · Fulcrum on StartOS ↗ · Bitcoin Core 32.1: chain size figures ↗
Install StartOS
A Start9 server comes ready to plug in, so skip to First setup. On your own hardware:
- Download the image for your hardware from the StartOS release page on GitHub. Standard suits most computers. Slim contains only open source firmware and drivers, and works only on certain hardware, such as the Server Pure.
- Verify the download. Start9's install guide shows how to compare the SHA-256 checksum and, for a stronger check, the GPG signature made with Start9's key, fingerprint 5456 DBFF 1B9D F905 041F A776 5259 ADFC 2D63 C217. Verifying downloads explains what each check proves.
- Write the image to a USB stick with balenaEtcher. Whatever drive you select is erased.
- Plug the stick into the server, connect the server to Ethernet and a surge protector, and boot from USB. Some computers need the boot order changed in their BIOS first.
- From another computer on the same network, open http://start.local. Choose your language, select the drive or drives to use, and confirm.
A Raspberry Pi skips the USB stick: you write the image straight to its microSD card, after updating the Pi's bootloader once, as Start9's guide describes.
First setup
- With the server on power and Ethernet, open http://start.local from a computer on the same network.
- Choose Start Fresh.
- Set a Master Password. It unlocks the dashboard and encrypts your backups. Start9 warns that resetting it is not simple, so write it down and keep it safe.
- Choose a Server Name. It becomes the server's local address: the name my-node gives my-node.local.
- When setup finishes, open the server's local address and trust its Root CA.
The Root CA is a certificate authority StartOS creates during setup to encrypt connections on your home network. Your devices have never heard of it, so each one that reaches the server on your network or over a VPN must trust it once. Download it from http://my-node.local, then follow Start9's steps for your system. Firefox needs one extra step. Devices that connect only over Tor do not need it.
Start9: initial setup ↗ · Start9: trusting your Root CA ↗
Install Bitcoin and let it sync
- Open Marketplace. In the Start9 Registry, choose Bitcoin Core and click Install.
- Start it. It begins downloading and checking the whole chain straight away, with nothing to configure first.
- On its Dashboard, the Blockchain Sync health check reads Syncing blocks... with a percentage, then Bitcoin is fully synced. StartOS also sends a Sync Complete notification.
The Community Registry, which also ships with StartOS, offers Bitcoin Knots (pre-RDTS) as a different flavor of the same Bitcoin service. Start9 does not maintain, recommend or support Community Registry packages. This guide uses Bitcoin Core.
Bitcoin Core on StartOS ↗ · Start9: Bitcoin guides ↗
Add an Electrum server
A Bitcoin node keeps no index of which addresses hold which coins, so finding a balance means searching the whole chain. An Electrum server builds that index, and a wallet gets its balance and history in seconds. Most wallets connect to a home node this way.
The Start9 Registry offers two. Install one:
- Fulcrum, the one Start9's guides use. It keeps a complete address index, so it stays fast for addresses with long histories. The index takes 180 GB or more, and Bitcoin must keep the full chain and its transaction index.
- Electrs needs the full chain and Bitcoin Core 31.2:1 or later. It cannot run on Bitcoin Knots (pre-RDTS).
For Fulcrum:
- In Marketplace, choose Fulcrum and click Install.
- If a task appears on Bitcoin, complete it. It applies the settings Fulcrum needs: pruning off, and the transaction index and ZMQ on. If Bitcoin has already synced, the transaction index then builds from the first block, tracked by its Index Sync health check.
- Start Fulcrum. Wait until Sync Progress says Fulcrum is synced. Until then a wallet shows only part of your balance.
Start9: Electrum servers ↗ · Electrs on StartOS ↗
Connect your wallets
Every wallet needs the same thing: an address from the Electrum server. On Fulcrum's page, open Interfaces, expand Electrum (SSL) and copy an address. It looks like ssl://my-node.local:PORT.
- Take the port from the address. StartOS picks it when the service is installed, so 50001 or 50002 from other guides may be wrong.
- Turn SSL on in the wallet. StartOS offers only the encrypted connection.
- On a phone, prefer the LAN IP address (192.168.x.x). The .local name needs mDNS, which some networks block.
Sparrow
- Open File > Settings... > Server.
- Set Type: to Private Electrum.
- Enter the host in URL: and the port in the box beside it.
- Turn Use SSL: on.
- Optionally, add your Root CA in Certificate:. Download it from http://my-node.local/static/local-root-ca.crt. Start9 notes that Sparrow connects without it, but with it a swapped certificate is caught.
- Click Test Connection.
To use Sparrow away from home, install the Tor service from the Marketplace, add an onion address to Fulcrum's Electrum (SSL) interface, and enter that address in Sparrow. Sparrow starts its own Tor connection for .onion addresses. Fulcrum's instructions add one exception: an onion address created with its SSL toggle off is plain TCP, so turn Use SSL: off for that one. The Sparrow guide covers the rest of the wallet.
Liana
Liana connects to Bitcoin Core only on the same computer. Its setup screen warns: "Connection to a remote Bitcoin node is not supported." An Electrum server on another machine works.
- At Choose backend, pick Use your own node, then I already have a node.
- Set Node type: to Electrum.
- Enter the address including its ssl:// prefix. Liana's note under the field asks for it.
- Tick Do not validate SSL Domain. Liana accepts only certificates signed by a public authority, so it rejects your server's own. With the box ticked, Liana does not check the certificate at all, so use it only for an address on your home network.
- Click Check connection.
A wallet that already exists can be switched under Settings > Node. The Liana guide covers the rest.
BlueWallet on your phone
- Open Settings, then Network, then Electrum Server.
- Enter the LAN IP address and the port, or tap Scan or import file and scan the address's QR code from the interface.
- Switch Use SSL on and tap Save. BlueWallet may ask you to restart it.
- Check that Status reads Connected.
BlueWallet's connection code accepts any certificate: no certificate step, and no check that the server is yours. Away from home it needs the Orbot app for Tor, and Start9's guide notes that users report repeated disconnections that way. The BlueWallet guide has more.
Start9: connecting a wallet ↗ · Start9: Bitcoin wallets ↗ · Liana: choosing your backend ↗ · BlueWallet 8.0.2 source ↗
Lightning on StartOS
The Start9 Registry offers two Lightning nodes, LND and Core Lightning, and tools such as Ride The Lightning, LNbits, Lightning Terminal and Alby Hub. A Lightning node works with a pruned Bitcoin node too.
A Lightning node holds funds on the server itself. With LND, the seed recovers on-chain funds only. Funds in channels come back through a channel backup file that changes whenever a channel opens or closes, and a StartOS backup holds it only as it was when taken. LND on StartOS offers Continuous Backups, which copies that file to Google Drive, Dropbox, Nextcloud or an SFTP server whenever your channels change. Start9 says to choose a target on a different machine. The Lightning wallet map and Lightning without surprises cover the choices.
Start9: Lightning wallets ↗ · Start9: continuous backups ↗
Updates and backups
Updates
StartOS never updates itself or your services without you.
- StartOS. A rocket badge appears on the System tab. Go to System > General and click View beside Software Update. Check who it is Signed by, read the notes and click Begin Update. The restart can take up to an hour with no progress shown: do not unplug the server.
- Services. A badge on the Updates tab counts what is waiting. Expand an update to see who signed it, then click Update.
Backups
- Go to System > Create Backup.
- Choose a target: a drive plugged into the server, under Physical Drives, or a shared folder on another computer, under Network Folders. A network folder must be shared over SMB 3.0 or later.
- Select the services, or Toggle all, and enter your master password.
- Wait for the Backup Complete notification before unplugging a drive.
Backups are encrypted with your master password. Each service stops while it is backed up and restarts afterwards. Each new backup updates the one already on that target, so Start9 recommends keeping backups on more than one target. Bitcoin's backup leaves out the blockchain, which re-syncs after a restore. You can restore one service or the whole server, including onto new hardware.
A server backup does not hold your wallet keys. Sparrow, Liana and BlueWallet keep those in the wallet or on your hardware signer, and the node never sees them. Back up your recovery words, and Liana's descriptor, as each wallet's guide explains. If the node dies, your on-chain coins are unaffected.
Start9: updating StartOS ↗ · Start9: creating backups ↗
What you trust Start9 with
- The packages. Start9 maintains, tests and supports what is in the Start9 Registry. Community Registry packages have passed Start9's technical checks for listing but are not maintained, recommended or supported by Start9. You can add other registries or install a package file yourself.
- The updates. Packages and StartOS updates are signed. A new install trusts three keys, labelled drbonez, matthill and Start9, and StartOS warns before installing anything no trusted key has signed. System > Trusted Keys shows and changes what you trust.
- The code. The MIT licence lets anyone audit, build or fork it.
- The box itself. The server's own drive is not encrypted with your master password. Start9's documentation says anyone holding the server or its drive can read your services' data.
Start9: default registries ↗ · Start9: trusted keys ↗ · Start9: overview ↗
Before you rely on it
- The server is wired to your router, on a surge protector, with a fixed IP address.
- Your master password is written down and stored safely.
- Bitcoin shows Bitcoin is fully synced and Fulcrum shows Fulcrum is synced.
- Each wallet is connected to your server, not a public one: Sparrow's Test Connection succeeds, BlueWallet's Status reads Connected.
- A backup to at least one drive or network folder has finished with Backup Complete.
- If you run Lightning, continuous backups go to another machine.
- Your wallets' recovery words are backed up away from the server.
Umbrel is the main alternative for a home node; the Umbrel guide covers it.
Sources & further reading
Researched 17 November 2026. Software and services change: check the current documents before you act.
- StartOS 0.4.2.1 release ↗
- StartOS 0.4.0 release ↗
- StartOS: source code and README ↗
- StartOS: licence ↗
- StartOS: third-party notices ↗
- Start9: hardware specifications ↗
- Start9: installing StartOS ↗
- Start9: update to StartOS 0.4.0 ↗
- Start9: initial setup ↗
- Start9: trusting your Root CA ↗
- Start9: local access ↗
- Start9: default registries ↗
- Start9: trusted keys ↗
- Start9: updating StartOS ↗
- Start9: creating backups ↗
- Start9: overview ↗
- Start9: Tor ↗
- Start9: archival vs pruned nodes ↗
- Start9: Electrum servers ↗
- Start9: connecting a wallet ↗
- Start9: Bitcoin wallets ↗
- Start9: Lightning wallets ↗
- Start9: continuous backups ↗
- Start9 Marketplace ↗
- Bitcoin Core on StartOS: instructions ↗
- Fulcrum on StartOS: instructions ↗
- Electrs on StartOS: instructions ↗
- bitcoin.org: running a full node ↗
- Sparrow 2.5.6: server settings source ↗
- Liana: choosing your backend ↗
- Liana 16.0: the app's own wording ↗
- Liana 16.0: Electrum connection settings ↗
- rust-electrum-client 0.24.2: TLS handling ↗
- BlueWallet 8.0.2: English wording ↗
- BlueWallet Electrum client: TLS handling ↗
- Bitcoin Core 32.1: chain size figures ↗
Umbrel: run a node and connect your wallets to it → · Run a node you actually use → · Sparrow: build a wallet you can inspect → · Liana: a wallet with a built-in recovery plan → · BlueWallet: a clearer everyday wallet → · Choose the Lightning setup you can maintain →
